Skip to content
Home » How to Fix Unidentified Network & No Internet In Windows

How to Fix Unidentified Network & No Internet In Windows

Well, the internet is perfect, but what about that time when the internet does not literally work? In most cases, a bit of troubleshooting should support fixing any unidentified network errors or no internet in Windows. In this tutorial, you will learn the way to Fix Unidentified Network & No Internet In Windows.

How to Fix Unidentified Network & No Internet In Windows

However, with this step-by-step guide, you guys will also be able to take all of the essential steps in order to fix your internet. So that you guys are able to also get back online as soon as it is possible.Unidentified Network

There are different causes for internet issues on Windows. However, you will just need to try each step until you find a solution.

Check The Internet to Fix Unidentified Network & No Internet In Windows

First of all, you should test if your internet is actually working properly or not. It is the best beginning point to make sure it’s not an issue related to an accurate website or app. Head to your browser & then visit Google. Whether the page loads, your internet is working accurately but other websites you are accessing probably be temporarily down.

Whether the page does not load, or it says you are not connected to the internet, though it is time to start troubleshooting.

Fix Issues With Your Router Or Modem

Whether you guys know that your internet isn’t working, so then you should clarify that there are not any problems with your router or modem. Though every networking device will work a little bit differently. Though we are able to also only provide a rough guide for these steps. You guys probably need to check your router or modem manual for accurate details.

Powering off your router or modem & also then switching it back on is a great start. Here you should wait a few minutes for everything to come back online. Just visit Google to view whether this resolves the unidentified network or no internet issue. Whether not, continue with the steps below.

Whether You Are Using a Wired Connection: 

  1. Here first of all you have to check that the ethernet cable is connected to your PC accurately.
  2. Then must check that the exact ethernet cable is connected to your router or modem.
  3. Now make sure there’s no injury to the cable.
  4. Confirm that all cables are safe in your router. Occasionally a loose cable is all it takes to lose internet access.
  5. Assure the cable for your modem or router is connected safely to the port on your wall.
  6. Whether you guys are using a wireless access point, powerline adapter, or other networking equipment, make sure the connections are functioning and correct.

Whether You Are Using a Wireless Connection:

  1. Here firstly Check the WiFi light on your router is enabled. Whether not, wait or call your ISP for assistance.
  2. Tap the arrow on the taskbar and choose the networking option in order to attempt to reconnect to your network.
  3. Whether available, re-enter your WiFi password correctly.

However, just after following these steps, attempt to visit Google once more from your browser. Whether the connection still is not working, follow the next steps.

Update Your Network Card Driver to Fix Unidentified Network & No Internet In Windows

Windows 10 is best at automatically finding & installing the right drivers for your hardware. Though whether there is a potential driver issue, follow the steps below.

  1. First of all head to the Start menu and search for Device Manager.
  2. Now go to Device Manager.
  3. Tap the arrow on the Network adapters option.
  4. Right-click your network adapter.
  5. Just tap Update Driver.
  6. Click Search automatically for updated driver software.
  7. Here await for the driver installation process to complete.

Next, you should try to visit Google in your browser once more. Hopefully your internet will now work.

Do not know which network adapter is the correct one? Follow the steps below to find out.

  1. Head to the Start Menu.
  2. Type CMD and tap on Command Prompt.
  3. Type ipconfig /all and press enter.

You guys will also see a number of results. There should be a single Ethernet or WiFi adapter, that will also communicate with a name found in the device manager. Other consequences will most probably be for virtual ethernet devices such as VPNs.

Also see: Minecraft Not Using GPU? Tips and Tricks to Force Minecraft to Use It

Disable Virtual Ethernet Devices

Whether you have not found a solution so far & are still getting errors just about an unidentified network or have no internet. So you should try to clear any virtual ethernet drivers on your computer as these are able to also cause major issues with how your computer connects to the internet. A virtual ethernet driver could also be anything from a VPN to software created to make better ping or packet loss.

You are also able to find virtual ethernet devices & then disable them by following the steps below.

  1. Head to the Start Menu.
  2. Now you should type View Network Connections and tap on the result that appears.
  3. You guys will also now view your ethernet devices.
  4. Right-click on each network device that relates to software and tap Disable.
  5. Whether you are not sure, you are able to Google the name of each network device in order to learn more before disabling them.

Both Ethernet & WiFi Adapters May Be Active

Whether two network adapters are active at the exact time, so then this can also cause issues with your connection. However, it’s always too good to use a wired connection over WiFi. Similarly, you are able to also simply disable your WiFi connection whether this is a problem for you.

  1. Head to the Start Menu.
  2. Simply here you should search for View Network Connections and tap on the result.
  3. Right-click every adapter here & disable all of them except for your basic ethernet adapter.

Reset TCP/IP Stack

By using this command will also permit you to reset some of your networking settings back to default. It is able to also fix the issues that probably have appeared after installing definite software or making manual conversions to your network settings.

  1. First of all head to the Start Menu.
  2. Now type CMD & right click on Command Prompt.
  3. Tap Run as administrator.
  4. In the Command Prompt window, so should type netsh int IP reset & press enter.
  5. Reboot your computer.

Whether you are still facing issues, follow the next troubleshooting steps mentioned below.

Fix the Issues With Your Network Adapter

There probably be some underlying problems with your network adapter that are also able to quickly identified within the Windows control panel. Whether you have already updated your network adapter drivers, here abide by the steps that are mentioned below to try and identify the other issues.

  1. First of all, you have to head to the Start Menu.
  2. Here type View Network Connections and tap on the result that appears.
  3. Right-click on your active network adapter.
  4. Finally, tap diagnose and then wait for the troubleshooter in order to finish.

By default, whether your network adapter is set to utilize a static IP address. But it should be using DHCP, this should resolve it. However, it is a great idea to check yourself as well. For doing this, tap on Start, then Settings (gear icon), and then tap on Network and Internet.

Then tap on Change adapter options underneath the Change your network settings heading.

Though this will then bring up another window that will display you all of the network adapters on your system. Just relaying on the one that is active, you have to right-click on it and then select Properties.

Similarly, this will also bring up the Ethernet or Wifi Properties dialog box. Tap on Internet Protocol Version 4 (TCP/IPv4) and tap on the Properties button.

At last relaying on your network, you either must have the correct static IP information or you need to just choose Obtain an IP address automatically & Obtain DNS server address automatically.

Hopefully, this is able to also then fix your issues, but whether not move onto the next step below.

Disable Firewalls In Your Antivirus

Well, Guys, the Firewalls are created to prevent worse traffic or actors from accessing your network. Just because they deal with network access at an administrative level, they are also able to occasionally cause some network connectivity problems for simple tasks just like browsing online.

In order to find out whether your antivirus firewall is causing problems with your internet connection. So you should temporarily power it off to test it. Remember that at a time when it’s powered off, so then you could be endangering to attack, so you should visit trusted websites.

However, you guys must search online for the way to disable your firewall for your specific antivirus. Normally you will just have to search for your antivirus just via the start menu, head to the antivirus, and tap on the firewall option. There will also be options to disable the firewall for a set period of time.

At a time when it is disabled, so then you should head to your browser & visit a website like Whether your internet is working perfectly, so then you should uninstall that antivirus & try another one.

Must read this article: A Few Best Builds For Kodi 17 Krypton _Guide


Well, We hope that this guide has helped you to fix any issues with an unidentified network on your Windows PC. Whether you still need support, so then leave a comment in the section below.

Leave a Reply

Your email address will not be published.